How to crimp a cable RJ45
What you need?
A reasonable length FTP cable Two tips RJ45
A clip crimp
How to proceed?
Strip the cable to 2 cm at each end and separate the strands.
They are usually divided into 4 twisted pairs of colors:
Orange / orange-white
Green / green-white
Blue / white and blue
Brown / brown-white
Making a straight cable
To obtain a straight cable, the tips must be crimped typically the same way at each end by respecting the twisted pair size.
In general, the code used is:
1) orange-white
2) orange
3) green-white
4) Blue
5) blue-white
6) Green
7) brown-white
8) brown
For a crossover cable
To obtain a crossover cable, reverse the parts 1 / 2 and 3 / 6, so on the one hand the same cable as above, and the other as follows:
1) green-white
2) green
3) orange and white
4) Blue
5) blue-white
6) orange
7) brown-white
8) brown
No comments:
Post a Comment