How to Configure LAN Network in Windows 7

LAN Configure in Windows 7 

You can  make LAN connection using  by Hub (for more computer)or using by Switch(for more computer) or using by only cable(for 2 computer).

On PC 1

Step1

1.    Connect LAN cable

2.    Click  Start go to Control panel

3.    Click      Network and  Internet

4.    Click  Network and Sharing center

5.    Click   Change Adapter settings

6.    Double Click à  Local area Network

7.     Click  Internet protocol version 4(TCP/IPv4)

8.    Click  Properties

9.    Select  Use the flowing IP address

     IP address:192.168.137.1

     Subnet mask:255.255.255.0

   10.Click   OK

Step2

1.    Click  Start go to Control panel

2.    Click   Network and  Internet

3.    Click  Network and Sharing center

4.    Select  Choose homegroup and Sharing options

5.    Click Creat Homegrroup

Note:  If have not select Internet protocol version 6(TCP/IPv6) then you can’t create Homegroup.

On PC 2

Step1

1.            Connect LAN cable  
   
2.      Click Startà  Control panel
3.      Click  Network and  Internet 
4.      Click Network and Sharing center 
5.      Click  Change Adapter settings
6.       Double Click  Local area Network 
7.      Click  Internet protocol version 4(TCP/IPv4)
8.      Click  Properties
9.      Select Use the flowing IP address               IP address:192.168.137.1
                  Subnet mask:255.255.255.0
   
    Click OK

Step2

1.    Click  Start go to Control panel

2.    Click   Network and  Internet

3.    Click  Network and Sharing center

4.    Select  Choose homegroup and Sharing options

5.     Click Creat Homegrroup

Note:  If have not select Internet protocol version 6(TCP/IPv6) then you can’t create Homegroup.

And so on………………………………..